The Retracta Ladder® is a retractable elevator pit ladder engineered to fit tight clearances where a traditional, stationary pit ladder won't work. Click to read more about the Retracta Ladder®. 

The Powered Retracta Ladder® is a linear actuator driven retractable elevator pit ladder engineered to extend from the wall 3 feet and align with the entrance frame of a center-opening car. Click to read more about the Powered Retracta Ladder®. 

The Adjusta Ladder™ is a stationary elevator pit ladder engineered to allow one product to be installed from 4.5" to 7" center of rung to wall in 1/2 inch increments. Click to read more about the Adjusta Ladder™. 

The Low-Profile Fishplate™ is a seismic, full section modulus guiderail fishplate for 15# elevator guiderails that only requires 1 inch clearance behind the guiderail.  Ideal for new installations with tight hoistway clearances or retrofit existing elevators to meet seismic standards. Click to read more about the Low-Profile Fishplate™. 

The Rope Align Block™ is used in conjunction with an elevator rope brake to align the hoist ropes in 1:1 roped applications so the ropes fit within the jaw clearances of the rope brake.  Click here to see more...  

The Deflector Sheave Isolator™ is a highly engineered, job specific isolator set that mounts in between the base of the overhead machine beams and the pillow blocks of the deflector sheave.  It is a very effective solution for isolating the sheave from the structure and eliminating structural borne vibration that can amplify (resonate) through the structure, causing objectionable noise.  Ideal for new installation or retrofit.  Click here to see more...    

We also provide custom manufactured components designed for specific elevator new construction and alteration projects including:

  structural machine supports for PMAC gearless & geared  machines
  rope brake (Rope Gripper™, BODE & Warner Electric) mounts
  guide rail & bracket reinforcement to meet seismic compliance
  seismic rope retainers for traction, deflector & 2:1 sheaves
  elevated pit work platforms for deep pits
  overhead secondary decks for excessive overhead heights
  custom counterweight frames, min. 4” depth
  combination roller guide adapters / seismic retainers

For a total solution for your major elevator alteration project, have it engineering by
and have the custom metalwork provided by Smart Elevator Tech, LLC.